View VO1263AAC_4620291.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VO1263AAC/VO1263AACTR/VO1263AB
Vishay Semiconductors
Dual Photovoltaic MOSFET Driver Solid State Relay
DIP 8 7 6 5
FEATURES
* * * * * * * High open circuit voltage, up to 14.6 V typical High short circuit current, up to 42 A typical Isolation test voltage 5300 VRMS Logic compatible input High reliability Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
SMD
1
2
3
4
- Control 1 + Control 1 - Control 2 + Control 2
i179020_1
- Output 1 + Output 1 - Output 2 + Output 2
APPLICATIONS
* * * * * * * High-side driver Solid state relays Floating power supply Power control Data acquisition ATE Isolated switching
DESCRIPTION
The VO1263AB/AAC photovoltaic MOSFET driver consists of two LEDs optically coupled to two photodiode arrays. The photodiode array provides a floating source with adequate voltage and current to drive high-power MOSFET transistors. Optical coupling provides a high I/O isolation voltage. In order to turn the MOSFET off, an external resistance (gate-to-source) is required for gate discharge.
Note See "solid state relays" (application note 56)
AGENCY APPROVALS
UL1577: DIN EN: CUL: file no. E52744 system code H or J, double protection 60747-5-5 file no. E52744, equivalent to CSA bulletin 5A
ORDER INFORMATION
PART VO1263AAC VO1263AACTR VO1263AB REMARKS Tubes Tape and reel Tubes
(1)
PACKAGE SMD-8 SMD-8 DIP-8
ABSOLUTE MAXIMUM RATINGS
PARAMETER SSR LED input ratings continous forward current LED input ratings reverse voltage Photodiode array reverse voltage Ambient operating temperature range Storage temperature range Pin soldering temperature (2) Input to output isolation voltage
TEST CONDITION
SYMBOL
VALUE
UNIT
IF IR 10 A IR 2.0 A VR VR Tamb Tstg t = 7.0 s max. t = 60 s min. Tsld VISO
50 5.0 100 - 40 to + 100 - 40 to + 150 270 5300
mA V V C C C VRMS
Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). Document Number: 84639 Rev. 1.6, 07-May-08 For technical questions, please contact: optocoupler.answers@vishay.com www.vishay.com 249
VO1263AAC/VO1263AACTR/VO1263AB
Vishay Semiconductors Dual Photovoltaic MOSFET Driver Solid
State Relay
ELECTRICAL CHARACTERISTICS
PARAMETER LED forward voltage Detector reverse voltage TEST CONDITION IF = 10 mA IR = 2.0 A IF = 5.0 mA IF = 10 mA Open circuit voltage (pins 5, 6 or 7, 8) IF = 15 mA IF = 20 mA IF = 30 mA IF = 5.0 mA IF = 10 mA Short circuit current (pins 5, 6 or 7, 8) IF = 15 mA IF = 20 mA IF = 30 mA SYMBOL VF VR(PDA) VOC VOC VOC VOC VOC ISC ISC ISC ISC ISC 3.0 7.5 11 15 21 10.3 MIN. 1.2 TYP. 1.3 350 13.3 13.8 14 14.3 14.6 6.0 15 22 30 42 16.5 MAX. 1.6 UNIT V V V V V V V A A A A A
Note Tamb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements.
SAFETY AND INSULATION RATINGS
PARAMETER Climatic classification (according to IEC 68 part 1) Comparative tracking index VIOTM VIORM PSO ISI TSI Creepage distance Clearance distance 7 7 CTI 175 8000 630 500 300 175 TEST CONDITION SYMBOL MIN. TYP. 40/100/21 399 V V mW mA C mm mm MAX. UNIT
FUNCTIONAL DESCRIPTION
Figure 1 outlines the IV characteristics of the illuminated photodiode array (PDA). For operation at voltages below VOC, the PDA acts as a nearly constant current source. The actual region of operation depends upon the load. The amount of current applied to the LED (pins 1 and 2 or 3 and 4) determines the amount of light produced for the PDA. For high temperature operation, more LED current may be required.
www.vishay.com 250
For technical questions, please contact: optocoupler.answers@vishay.com
Document Number: 84639 Rev. 1.6, 07-May-08
VO1263AAC/VO1263AACTR/VO1263AB
Dual Photovoltaic MOSFET Driver Solid Vishay Semiconductors State Relay
TYPICAL CHARACTERISTICS
Tamb = 25 C, unless otherwise specified
45
70
ISC - Short Circuit Current (A)
Short Circuit Current (A)
40 35 30 25 20 15 10 5 0 0 2 4 6 8
IF = 30 mA IF = 20 mA IF = 15 mA IF = 10 mA
60
IF = 30 mA
50
IF = 20 mA
40 30 20 10 0 - 40 - 20 0 20
IF = 5 mA IF = 10 mA
IF = 15 mA
IF = 5 mA
10
12
14
16
18
19639
40
60
80
100
19751
VOC - Open Circuit Voltage (V)
Ambient Temperature (C)
Fig. 1 - Short Circuit Current vs. Open Circuit Voltage
Fig. 4 - Short Circuit Current vs. Temperature
17 14
Open Circuit Voltage (V)
RL = 20 M
16 15 14 13 12 11 10 9 - 40 - 15 10 35 IF = 10 mA IF = 5 mA
Output Voltage (V)
12 10 8 6 4 RL = 500 K 2 0 0 5 10 15 20 25 30 35 40 45 50 RL = 200 K RL = 10 M RL = 5 M RL = 2 M RL = 1 M
IF = 50 mA IF = 30 mA
IF = 20 mA
60
85
19637
LED Forward Current (mA)
19641
Ambient Temperature (C)
Fig. 2 - Output Voltage vs. LED Current
Fig. 5 - Open Circuit Voltage vs. Temperature
70
1.60
Short Circuit Current (A)
LED Forward Voltage (V)
60 50 25 C 40 30 20 10 0 0 10 20 30 40 50 100 C - 40 C
1.55 1.50 1.45 1.40 1.35 1.30 1.25 IF = 2 mA
IF = 50 mA
IF = 30 mA IF = 20 mA
IF = 5 mA IF = 10 mA IF = 15 mA 0 20 40 60 80 100
1.20 - 40 - 20
19716
19638
LED Forward Current (mA)
Fig. 3 - ISC vs. LED Forward Current
Ambient Temperature (C)
Fig. 6 - LED Forward Voltage vs. Temperature
Document Number: 84639 Rev. 1.6, 07-May-08
For technical questions, please contact: optocoupler.answers@vishay.com
www.vishay.com 251
VO1263AAC/VO1263AACTR/VO1263AB
Vishay Semiconductors Dual Photovoltaic MOSFET Driver Solid
State Relay
1 - Channel 1 control 2 +
8 P-channel JFET 7 2.0 M Switch1 N-channel MOSFETs
3 Channel 2 control 4 - +
6 P-channel JFET 5 Switch2 N-channel MOSFETs
2.0 M
ilh1262cb_09
Fig. 7 - Typical Dual Form A Solid State Relay Application
www.vishay.com 252
For technical questions, please contact: optocoupler.answers@vishay.com
Document Number: 84639 Rev. 1.6, 07-May-08
VO1263AAC/VO1263AACTR/VO1263AB
Dual Photovoltaic MOSFET Driver Solid Vishay Semiconductors State Relay
PACKAGE DIMENSIONS in inches (millimeters)
DIP pin one ID 4 0.268 (6.81) 0.255 (6.48) 5 6 78 ISO method A 3 2 1
0.390 (9.91) 0.379 (9.63) 0.045 (1.14) 0.030 (0.76) 4 typ. 0.150 (3.81) 0.130 (3.30) 0.050 (1.27) 0.022 (0.56) 0.018 (0.46) 0.100 (2.54) typ.
i178008
0.300 (7.62) 0.031(0.79) typ.
10 0.035 (0.89) 0.020 (0.51) 3 to 9 0.012 (0.30) 0.008 (0.20)
0.250 (6.35) 0.230 (5.84)
0.130 (3.30) 0.110 (2.79)
SMD pin one ID
0.268 (6.81) 0.255 (6.48) 0.100 (2.54)
0.030 (0.76) R 0.010 (0.25) 0.070 (1.78)
0.390 (9.91) 0.379 (9.63) 0.031 (0.79) typ. 0.045 (1.14) 0.030 (0.78) 0.150 (3.81) 0.130 (3.30) radius
0.315 (8.00) min. 0.435 (11.05) 0.395 (10.03) 0.375 (9.52) 0.312 (7.80) 0.298 (7.52)
0.060 (1.52)
ISO method A
3 to 7
4 typ. 0.050 (1.27) typ.
0.008 (0.25) 0.004 (0.10) 0.100 (2.54) typ.
10 0.040 (1.02) 0.020 (0.51) 0.315 (8.00) typ.
0.010 (2.54) typ.
i178009
Document Number: 84639 Rev. 1.6, 07-May-08
For technical questions, please contact: optocoupler.answers@vishay.com
www.vishay.com 253
VO1263AAC/VO1263AACTR/VO1263AB
Vishay Semiconductors Dual Photovoltaic MOSFET Driver Solid
State Relay
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com 254
For technical questions, please contact: optocoupler.answers@vishay.com
Document Number: 84639 Rev. 1.6, 07-May-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of VO1263AAC

	To Download VO1263AAC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .